Specifications include, but are not limited to: All equipment described herein shall be installed on 2020 Chevy 3500WT 4WD Reg. Cab & chassis furnished by the LFUCG ; A galvanneal steel service body KC132M2094 KC Style or equivalent, shall be installed. Body shall have standard compartment, shelf, and divider equipment as shown in published literature. There shall be a Vanair Viper 70 gas rotary screw air compressor with generator model #050719 installed in the body. The generator should get its fuel from the truck’s fuel tank. The compressor/generator exhaust should be vented outside of truck. ; Canopy Top: Center bed area of body shall be fully enclosed with a canopy top providing a minimum six feet (6’) of inside clearance from the bed floor ; Body color must match truck color- Chevy Summit White ; Lighting: All lighting required by the Federal Motor Vehicle Safety Standard #108, shall be installed. All rear facing stop, turn, or tail lamps shall be flush mounted, sealed LED units (such as Grote 53252, or Truck Lite 44982R). All lamps shall be grommet mounted, sealed LED units (such as Grote 47122 or Truck Lite 10250R).