Specifications include, but are not limited to: PRINTED GRAPHIC MATERIAL REQUIREMENTS: The base sheeting shall be 3M 680 CR series film, a highly flexible, self-adhesive retro-reflective cast PVC film specially designed for high quality fleet vehicle graphic applications that has a positional, pressure-activated adhesive, premium laminate overcast and a total thickness of .01 to .02 inches. Color Matching: Blue – PMS 286C (“Lexington Blue”) Black – 3M 9705 with halftone Red – to match 3M 680-72 White – unprinted 3M IJ680-10 white PATROL CAR GRAPHIC DESIGN AND ENGINEERING REQUIREMENTS: All graphic panels are to be engineered and produced so that each panel fits within a specific body panel (i.e. Front Door) and does not require cutting of the graphic during the installation. These cuts should allow for tolerance from vehicle to vehicle. Excess premask is to be included to act as a positioning aid and it is to conform to the body features of the vehicle. All decals shall be kiss cut, pre-spaced, and premasked. All decal segments must be in one (1) piece, splicing is NOT acceptable. The vendor will provide graphic design artwork or adapt original design artwork, including any setup required within 2 weeks of being awarded the bid. Any fee associated with this requirement should be included in the bid cost. Graphic design artwork, related products and files are copyrighted property of the Lexington Police Department. This includes but is not limited to reproduction, derivative, distribution, and display rights without written consent from the Lexington Police Department.