Specifications include, but are not limited to: Light Tower Dimensions: Light tower will be approximately (Nested): 12”H x 47”W x 34”D Light tower will be approximately (Fully Upright): 87.5”H x 52”W x 34”D Light tower will weigh approximately: 165 lbs. Light tower will extend 87.5” above the mounting surface and extend to full upright position in less than 15 seconds Light Tower Features: Light tower shall be of aluminum construction, with stainless-steel shafts and bronze bushings for long life and low maintenance Capable of overhanging the side or back of the trailer to provide a maximum illumination to the vicinity adjacent to the trailer Light tower shall be a two stage articulating device with a lighting bank on top of the second stage capable of continuous 360-degree rotation Light tower shall be elevated by electric linear actuators, one (1) actuator shall elevate the lower stage and one (1) actuator shall adjust the light bank from 0 to 110 degrees Capable of rotating either direction from a stowed position Will not require tapping into a vehicles braking system to be operated, eliminating the chance for vehicle braking problems Light tower base shall have a light that illuminates the envelope of motion during any movement of the light tower mast as required by NFPA1901 Light tower shall be tested in wind conditions of 90 mph minimum Able to withstand all weather conditions (including ice buildup, high winds and blowing dust) Light tower must be all electric and operate on 120 VAC Lighting System: Six (6) FRC Spectra 220 Watt LED Lights, capable of 20,000 lumens per light Light heads shall be mounted three (3) on each side of the light tower, giving two (2) vertical lines of three (3) when the lights are in the upright position Light tower will have backlighting which enables the bottom row of lamp heads to rotate 180-degrees, making it possible to light both sides of the scene