Specifications include, but are not limited to: Surface Preparation 1. Protect adjacent surfaces and landscaping from contact with product. 2. Prepare surfaces in accordance with manufacturer’s instructions. 3. Remove dirt, debris, oil, grease, sealers, curing compounds, vegetation, loose coatings, loose materials and other surface contaminants which could adversely affect application of product. Pressure wash entire surface. 4. Repair cracks, depressions and other surface defects in accordance with manufacturer’s instructions before application of color coating. 5. Use router to remove dirt and caulk in all control joints. Replace with manufacturer’s recommended materials. 6. Repair spalled areas and level depressions 1/8-inch or deeper with patch binder in accordance with manufacturer’s instructions. 7. Apply adhesion promoter over entire concrete surface in accordance with manufacturer’s instructions. 8. Apply a minimum of one (1) coat of filler course to provide smooth underlayment for application of color coating. 9. Ensure surface repairs are flush and smooth to adjoining surfaces. Application 1. Blend with mechanical mixer to ensure a uniform mix. Mix ratio per manufacturer’s specifications and apply in accordance with manufacturer’s instructions. 2. Apply a minimum of two (2) coats of acrylic resurfacer per manufacturer’s specifications of gallons per square foot. 3. Apply a minimum of two (2) coats of color coating to prepared surfaces per manufacturer’s specifications of gallons per square foot. 4. Do not apply under the following conditions: When rainfall is imminent or extremely high humidity prevents drying. If surface and air temperature is under fifty (50) degrees Fahrenheit or if surface temperature is in excess of one hundred-forty (140) degrees Fahrenheit. 5. Surface shall be green with the exception of running lanes, pitcher’s circle, home plate circle and batter’s boxes. 6. Paint to fences.