Specifications include, but are not limited to: EQUIPMENT: Submersible wastewater pumps for pumping raw, unscreened wastewater flow. Pump to replace Flygt C-3127 with 6” discharge Provide Xylem/Flygt type N, Sulzer/ABS type XFP, or KSB type KRT Existing bases and guide rails are manufactured by Flygt. Pump supplier to provide compatible equipment or shall supply new guide rail adapter, fittings, and required materials to install on existing bases and guide rails. Pump supplier shall ensure compatibility with existing facility – Existing facility construction drawings, specifications, and equipment submittals are available upon request. Site visits and field measurements are recommended. TECHNICAL INFORMATION: Duty Point (1 pump): 1,000 gpm @ 18 ft head Duty Point (2 pumps): 725 gpm each @ 25 ft head Static Head: 15 ft Solids Handling: 3” minimum Horsepower: 10 HP maximum Speed: 1800 rpm Efficiency: IE3 Premium Efficiency Motor Service Factor: 1.15 minimum Supply Voltage: 480 Volts, 3 phase, 60 Hz Starting: Solid State Soft Start – suitable for future Variable Frequency Drive Motor Insulation: Class F or H Motor Compartment: Air Filled Seals: Double Seals with oil filled chamber between seals Seal Material: Silicon Carbide on Silicon Carbide or Tungsten Carbide on Tungsten Carbide