Specifications include, but are not limited to: Year shall be [2019] or latest model available. Toro Groundsmaster 7210 or equivalent. Engine: Minimum 35 hp, 3,000 rpm, liquid cooled diesel engine. Deck Assembly: 72” base deck with fine cut Guardian Recycling Kit. Six foot cutting width, 7 gauge welded steel, 1.25” spindles, and cutting height to go from 1” to 6”. Dedicated mulching decks, full-floating with anti-scalp rollers. PTO driven with hydraulic lift and jack stand. Height of cut 1” to 6” in .50” increments. Ground Speed: Forward 0-12 mph and 0-8 mph in reverse. Transmission mounted directly to engine, via bell housing, two independent closed-loop circuits. One pump/motor controlling left side forward, neutral, and reverse, and one pump/motor controlling right side forward, neutral, and reverse. Tires: Mower to include 1 each mounted spare tire/wheel for front and rear of mower. Controls: Key operated ignition switch. Steering to be adjustable twin sticks, Reverse/Neutral/Forward, located on sides of operator. 12 volt power port. Instrumentation: Mower to have volt, temperature, and hour meters. System alarms for water in fuel system, loss of oil pressure, water temperature, and non-charging alternator. “My Turf” wireless hour meter monitoring system. Lighting: Road light kits with flashing amber/clear strobes front and rear. Lift Assist: Mower to be equipped with hydraulic liftassist for easy adjustment in mowing height. Seats: Adjustable seat. High back, vinyl covered seat with fore/aft adjustment, adjustable arm rests, full- ride suspension. Safety: ANSI compliant. Manufacturers’ standard ROPS, operator seat belt and attaching system.