Specifications include, but are not limited to: The skid steer rotary mower shall be a Diamond Mower brand or equivalent. Cutting head will weigh not less than 2030 lbs., and cutting width will be 84” of actual cut. Cutting head deck will have heavy duty steel housing, with full length replaceable skid shoes on inner and outer ends. Deck and side plates will be a minimum of ½” thickness. Cutting head will be rotary, hydraulically driven, and will be attached to the spindle by 6 5/8” grade-8 bolts with tapered bolt protector. Cutting assembly will be 63” solid 1” thick steel disk with 3 radial cutouts, and 3 case hardened, threaded inserts welded into place with ¾” thick full length bolt protector. Cutting assembly will accommodate 3 5/8”x5”x17-3/16” 360 degree swinging, single edged, brush or grass suction knives, attached to the dish with hexagonal blade bolts, castle nuts, and roll pins.