Specifications include, but are not limited to: Boat Description • Custom 18 ft all welded USGS approved • Crafted from at least 0.125” marine grade aluminum • Chop V front, flat bottom • 96 inch beam • 68 inch bottom • 24 inch sides • 48-52 inch front deck o Access door with storage underneath • 6” rear/stern splash sides • Side console with control box rack • Removable bow safety rail o OSHA approved minimum 42” height from front deck o Junction boxes for LED shock lights • Aluminum tread plate floor throughout • Rear splashwell • 1 ½” drain hole • Transducer mounting bracket • At least 12 gang fuse panel • 12 V accessory receptacle • Navigation lights • Horn and button • At least 750 gph bilge pump and switch • Toggle switch panel • Accessory batteries and battery box • Battery switch • LED shock lights o At least four LED high output shock lights at bow o Removable pole LED workup light at console o Onboard charging system • Removable live well approx. 40” x 24” x 24” o Dual hinge lid o flow through water system o quick disconnect hoses; sealing caps • Specific specs on the control box are as follows: o DC output voltage 0-600 VDC at 80 A peak o Pulse Rate adjustment from 1 pps to 300 pps in 1 pps increments o Duty Cycle adjustment from 1% to 100% in 1% increments o Voltage adjustment in 1 volt increments o Resettable fishing time