Specifications include, but are not limited to: partial depth asphalt repair, thermal crack repair, and curb and gutter repair, concrete base repair, and thermal crack repair City-wide ; milling 2” to 4” of asphalt pavement thickness and replacing with 2” to 4” asphalt surface coarse. ; sawing and removing the full asphalt pavement thickness and replacing with City BM-2. Asphalt repairs shall be compacted in a minimum of two lifts where the maximum lift thickness is 3” to 95% density. The full-depth asphalt repair shall be a minimum of three-feet (3’) in width and paid by ton of asphalt. ; f cold milling a two and one half foot (2.5’) wide strip of asphalt to a depth of three and one half inches (3.5”). Contractor shall clean the milled surface prior to tack placement. Place tack oil on the milled surface, followed by a 1” level-up course. Level-up course shall be a BM-2 surface mix. The level-up course will be tacked, followed by placing a 2.5’ wide strip of Knitted Fiberglass Reinforcement centered on the joint.