Specifications include, but are not limited to: concrete pavement repair which includes concrete panel repair and joint repair. Work also consists of Curb & Gutter, Driveways, Valley Gutter, sidewalk and wheel chair ramps repairs on locations as determined by the Engineer. The repair work shall include all costs for removing and reconstructing existing pavement, combined curb and gutter, drives, valley gutter and sidewalk, compaction of sub-grade, site restoration and traffic control. Concrete Pavement Repair, shall be reinforced with 6 X 12, W4 X W4 welded wire mesh. Wire mesh must be supported with the appropriate chairs spaced no greater than 36” apart. Where existing reinforced steel cannot be saved, No. 4 rebars 2'0" long on 30" centers with a minimum of 2 bars in any patch side shall be drilled and epoxied into existing concrete. The Epoxy shall be Simpson SET High Strength or equivalent. Hammering rebars into concrete is not allowed. ; Crack-sealing. Concrete pavement shall be crack sealed with ROADSAVER 221 crack sealant