Specifications include, but are not limited to: Trash: It is the responsibility of the Contractor to remove all paper, trash and other types of debris from lawn areas before mowing. Prior to leaving a site, the Contractor will remove all trash, tree limbs and excessive grass clippings and provide suitable disposal for it. Extra Pass: Extra mowing passes to disperse excessive grass clippings may be necessary. Group 1M It is the responsibility of the contractor to remove all vegetation from the point where the gutter meets the road including all curb joints. The contractor must also create and maintain a 90-degree edge where the turf meets the top of the curb. Weedeating is required of all areas where a mower cannot mow including all light poles and signs. Contractor will maintain sharp blades on all mowing equipment. All equipment will be removed from turf areas when re-fueling. Ramps are to be used for all medians and curbs. NO CURB JUMPING. The successful bidder will be required to cut the grass to a height of three (3) inches on all sites except ball fields which will be mowed at 2 ½”. These mowing heights may be adjusted during the mowing season. The Contractor will be required to edge and trim alongside any sidewalks, curbs, poles, fences or any structure each time a location is mowed. All sidewalks drives and curbs will be blown or swept of debris. The Contractor is to report any damage to turf, vegetation, buildings, vehicles or equipment as soon as practical. Grass is not to be blown on or against buildings on the property or vehicles parked on the grounds of the buildings or on the street adjacent to buildings. All grass is to be blown off sidewalks. All heavy accumulations of grass are to be removed from mowing locations by sweeping, bagging, raking or mowing to disperse clippings. Grass is to be hauled by the Contractor to a suitable disposal site if needed.