Specifications include, but are not limited to: Specifications: Cage to be built per the attached dimensions and below specifications: Cage material will be Gray in color. Each Cage Door will be 3' wide. Cage Door can be located in the corner or center of the wall based on vendor’s recommendation. Each Cage Door will have either keyed access from the outside and a release knob on the inside or a welded lug allowing for use of a pad lock to secure the cage. Each Cage Door will open outward. The cage material will be 10 gauge wire woven in a 2" x 1" rectangular mesh and welded inside a 1 3/4" x 1 3/4" x 1/8" steel angle frame or of comparable strength to such a design. No ceiling panels are required. All Cages must be able to be anchored to a concrete floor. Minimum interior cage ceiling height will be approximately 8'. There will be two cages: First cage will mount to 2 walls and will have two walls, wall A will be approximately 8’ long with a door as described and wall be will be approximately 20’ long. The second cage will have 2 walls and mount to a wall and to the first cage. The dimensions will be the same.