Specifications include, but are not limited to: This contract is for fabrication and installation of a dumping flat bed and goose-neck hitch for Vehicle #18436, which is currently assigned to the Flint Hills Trail State Park. Vehicle #18436 is a 2016 F350 4X4 Dually Crew Cab with a 60” CA (Cab to center of axle). The current bed must be removed by the installer. KDWPT will transport bed from installer location. The truck’s factory receiver hitch must not be altered and shall remain in its current location unless authorized to move or adjust. Hydraulic Dump Bed The custom made and installed hydraulic dump bed will be 96” W X 106” L and have the following: Steel Floor with minimum of 1/8” Tread Plate Stake Pockets for future installation of wood rails Rub Rail on driver and passenger side Head Ache Rack with a cab over spare tire mount Mud Flaps All D.O.T. lighting (LED) Electric over hydraulic dump system with a weight lift capacity of no less than eight (8) tons Hydraulic pump to be mounted in a box on passenger side under bed Hydraulic remote control mounted to allow operation from driver’s seat Bed primed and painted black with acrylic enamel Hinged access door in bed floor for access to the goose neck hitch installed on truck’s frame Goose Neck Hitch The goose neck hitch must be mounted to the trucks frame below the bed’s access door and will not conflict with the beds hydraulic dump system or movement of a goose neck trailer. It will come with a 2 5/16” ball installed. Safety Chain connections points, (2), in close proximity to the ball, shall be provided.