Specifications include, but are not limited to: The proposed improvements include, but are not limited to, Hot Mix Asphalt (HMA) resurfacing, granular shoulder placement, pavement markings, topsoil placement, and seeding. The proposed resurfacing method shall be to place an approximately one-inch (1”) leveling course where necessary and place a two-inch (2”) thick layer of surface coarse HMA over the prepped surface. The quantities herein represent the Engineer’s estimate of the amount of work to be completed. The City reserves the right to add or delete areas and quantities from those shown in the bid documents if deemed necessary. Actual as-built quantities may vary from bid quantities. The contractor will not be paid any premium for variations in quantities.