Specifications include, but are not limited to: Prepare fresh solutions of the EPA-registered disinfectant according to the product label to ensure efficacy. Apply disinfectant solution to all surfaces with a low pressure sprayer, or by wiping, or immersing the items in the solution. (Virkon instructions can be substituted.) Use high pressure sprayers with caution to avoid further spread or aerosolization of the HPAI/LPAI virus. Ensure all areas are covered thoroughly with the solution and remain “wet” throughout the necessary contact time; reapply if necessary. Rinse Rinse thoroughly with clean warm (if possible) water – rinsing is essential as detergents or disinfectants dried on components may cause deterioration of rubber or metal parts if not completely removed. Allow items to air dry. Some items may be placed in the sunlight for drying and additional disinfection. People – personal protective equipment (PPE)