Specifications include, but are not limited to: The contractor shall fully diagnose and analyze any problems with the two 60 HP, 10,000 gallons per minute (GPM) MWI Corporation submersible pumps and associated electrical controls. The diagnoses will include, but is not limited to the following: a full physical inspection of the pumps which may require removal; a Megger test on the pump power cables to check for any moisture in the cords and/or pump motor; an Ohm test of the motor winding; check the sensor leads for the motor thermal contact; check the sensor leads for the bearing thermal contact; check the variable frequency drives (VFDs) and soft starts. Other tests, required to make sure pumps are fully operational after repair, shall be completed.