Specifications include, but are not limited to:The State is seeking Respondents who can provide Mobility Modifications to existing vehicles located within the state of Iowa. 4.1.1 Respondent’s Responsibilities 4.1.1.1 The Respondent will be required to pick up the vehicle at the location provided in the solicitation, perform the modifications per the solicitation specifications, and deliver the modified vehicle back to the original location for inspection and acceptance, unless instructed otherwise in the solicitation. 4.1.1.2 The Respondent will set up appointments directly with the Agency Client when fittings are required during the installation of mobility equipment. 4.1.1.3 The Respondent is solely responsible for the safety and security of the vehicle from the time the vehicle is picked up by the Respondent to the time it is inspected and accepted at the final location designated in the solicitation. 4.1.1.4 The Respondent will make the Agency aware of any issues with installation such as incompatibility of the vehicle with the mobility equipment selected or other unforeseen issues. The Agency will provide final written approval to the Respondent for any amendments to the modification specifications. Respondent will not make changes to the specifications without written approval from the Agency. 4.1.1.5 Should any of the equipment installed by Respondent not perform properly within the warranty period, Respondent shall provide warranty service within a reasonable time frame based on parts availability and schedule. Only a Contractor who provides a warranty will be used when repairing modifications previously installed on a vehicle. 4.1.1.6 Respondent must provide a written statement to the owner of the vehicle regarding the work completed as well as list any Federal Motor Vehicle Safety Standards affected by their modification work on a label adjacent to the original equipment manufacturer’s label or the modifier’s certification label on the modified vehicle.