Specifications include, but are not limited to: Commercial Epoxy Resin floor system-not an epoxy coating Poured and troweled, 100 percent solids epoxy, marble chip and quartz aggregate flooring system. Poured and troweled as one layer. Seamless and self-leveling. Capable of reaching 3/16" floor thickness. Does not require an adhesion improving primer and can be applied directly over old tile or directly to concrete. Waterproof and slip resistant No VOCs Antimicrobial agent dispersed throughout the product. Impact and abrasion resistant Adhesion strength equal to or greater than 500 psi (ASTM D-4541). Bonding completely to the substrate it can not be chipped off or used as a weapon. Minimum Tensile strength 7,100 psi (ASTM C-307) Minimum Compressive Strength 17,000 psi (ASTM C-579) ; Protective Coating High performance, chemical resistant clear sealer for above flooring COVERAGE 1840 square ft Equal to Everlast Glaze coat ; Cove Base Primer Cove Base Primer Kit COVERAGE 380 Lineal feet at 4" High Equal to Everlast Cove Base Primer ; Cove Base Epoxy Kits Taupe Cove Base Kits as an integal part of flooring above. A 100% solids epoxy mortar designed for use on vertical surfaces. Non-porous, non-absorbent. Chemical, Impact and Shock Resistant.