Specifications include, but are not limited to: Coat Model / Design Super-Deluxe™Coat Janesville® Super-Deluxe™, Traditional Coat with Freedom design. Fully featured coat with Bi-swing Back for forward mobility. Coat Model / Design Coat Liner & Moisture Barrier K7 - Traditional Traditional Liner, Glide™ face cloth quilted to 2.3 oz NOMEX®/Kevlar® spunlace & 1.5 oz AraFlo® Dri, CROSSTECH® BLACK (Type 2F) PTFE/Nomex® Pajama Check laminated membrane Coat Inner Yoke Reinforcement LYR224 (Std) Semper Dri® front and back yokes sewn to coat thermal liners. (RM1377-059) (Super Deluxe, Liberty) Coat Water Well - Ever-Dri CLW207 (Std) Water Well: Chambray DWR 2 layer AraFlo® NOMEX®/Kevlar® spunlace quilt/pajama check crosstech waterwell with 3/4" loop, male snap, sew to coat liner sleeves. Coat Wristlets CLW753 (Std) 8" isodri® over the hand- KEVLAR® / NOMEX® / Spandex® construction Liner Pocket CLP702 (std.) 8.5" X 8.5" Black outer shell coat liner pocket. Collar Flashing CLF221 (Std) 3" Self fabric, PJ CROSSTECH lined split collar with 2 pieces 1x3" loop on moisture barrier, 2 pieces 1" loop set 1/2" from center along top attachment to shell. Use with CR236 & CR237 ; PBI® Max, 7.0 oz., Natural Color Reflective Trim CT104-PTY 3" NFPA Yellow Ventilated Triple Trim Drag Rescue Device BHS020 (Std) DRD: Firefighter Recovery Harness with 2" welt and 5.25x2.25" flap. 1 piece 1x2" loop for harness storage. 2 pieces 1x2" loop on shell flap closure, 2 pieces 1x2" hook on flap. 1 piece 1.5x2" hook on harness. ; Coat Collar CR237 (Std) 3" split self fabric collar with CROSSTECH® PJ lined. 2 pieces 1x3" hook on each end inside and two pieces 1" hook set 1/2" from center along top edge for liner attachment. 1.5x4" hook&loop for front closure. Coat Cuff Reinforcement CC700 1 pair self fabric coat cuffs with 3/4 " hook ; Pant Liner & Moisture Barrier K7 - Traditional Traditional Liner, Glide™ face cloth quilted to 2.3 oz NOMEX®/Kevlar® spunlace & 1.5 oz AraFlo® Dri, CROSSTECH® BLACK (Type 2F) PTFE/Nomex® Pajama Check laminated membrane Liner Inspection System PLO200 (Std) Pant liner inspection system with 1x3" loop located at right side of liner waist. MISC. Fasteners MF018 (Std) 1x3" hook sewn to right shell front for the pant liner inspection system. Pant Outer Shell Material PBI® Max Natural PBI® Max, 7.0 oz., Natural Color Pant Fly Closure FLY201 Pant fly w/ PJ Ctech,closure-1.5" hook & loop, 3/4" hook underneath PJ Crosstech for liner attachment. - Add Front Take-Up Strap Hook & Dee TUP503 1 short leather take-up strap riveted, 703 snap hook, D-ring.