Specifications include, but are not limited to: A. When applicable, templates shall be supplied to facilitate the installation of embedded anchoring equipment. B. All posts shall have electrical grounding studs incorporated into their associated anchoring equipment. All play products shall be grounded by the installer per local codes. C. All installation conduit wiring including electrical supply panel, PVC connections, piping, elbows, tees, play product assembly if required and other items relating to the installation shall be supplied by the general contractor. PLAY STRUCTURE A. The play structure must be multi-level. B. There must be play elements that are suitable for toddlers, teens and families. C. There must be at least two (2) Cannon Sprays. D. Two (2) slides. E. There must be one (1) Supersplash or large water dump bucket that holds not less than 20 gallons of water and not more than 50 gallons of water. F. If steel is used, it must be stainless steel. SAFETY AND CRAFTSMANSHIP a. All exposed edges of play products shall be machined to a rounded edge. b. All welds shall be grinded, polished, watertight, and factory pressure tested. c. Nozzles and Spray heads shall be recessed, flat or rounded to provide no protrusion hazard. d. All assembly and interactive play components shall be designed and built to ensure a completely safe play environment with no pinch point, entrapment or protrusion hazard. e. All accessible posts and support posts shall have rubber material Toe Guards installed and covering the anchoring assembly hardware from pinch points and protrusions. f. All products shall be designed in accordance with the latest ASTM and EN standards for aquatic play equipment.