Specifications include, but are not limited to: AGGREGATE SURFACE COURSE, TYPE BThis work will be done in accordance with section 402. The quantity is an estimated quantity to resurface existing Side Roads, Mailboxes and Private Entrances as needed in accordance with the plans as Resident Engineer. This item will be paid for by unit price per Ton. The contractor will furnish CA-6, CA-10, or RAP (Recycled Asphalt Pavement) AGCS approved.AGGREGATE SHOUDER, TYPE BThis work shall consist of shaping in slopes, shoulder lines and shoulder, prior to placing of shoulder stone. All such work is incidental to Aggregate Shoulders Type B and shall be at the direction of the Engineer. Shoulder stone gradation shall be CA-6, CA-10, or RAP (Recycled Asphalt Pavement) AGCS approved. This work shall be paid for by unit price per Ton. BITUMINOUS TACK COATThis work shall be in accordance with the applicable portions of Section 406 of the Standard Specifications. The Bituminous Materials shall be RC 70 and shall be applied at a rate as directed by the Engineer.TRAFFIC CONTROL PLANSTraffic control shall be in accordance with the applicable sections of the Standard Specification for Road and Bridge Construction, the applicable guidelines contained in the “Manual on Uniform Traffic Control Devices for Streets and Highways”, these special provisions, and any special details and Highway Standards contained in the plans.