Specifications include, but are not limited to: Size: Carrier Sheet: 8.5” x 11”; torn size 8.5” x 3.667” Decal: 3” x 3” Stock: Carrier Sheet – 28# White Ledger, die-cut to accommodate the glued release liner and decal described below. Decal - 1) Tamper evident security decal with an opaque adhesive and latent “VOID” mark(s) that appear on both the decal and the application surface upon removal. 2) The base material and printed decal must exhibit excellent durability in a harsh environment and a temperature range of -4 degrees Farenheit and 248 degrees Farenheit (e.g., SafTSeal™ EX-Void and EXM-Void) or better. 3) Decal is attached to a release liner sheet which is glued to the 28# White Ledger Carrier Sheet. Ink: Carrier Sheet: 1/1 black Decal: 2/0 PMS and black Finishing: Die cut, attach release liner with decal Number decal in one place. Number Carrier Sheet in three places all with the same number. The decal and Carrier Sheet numbers are the same. Agency to provide numbering sequence. Two micro-perforations for carrier sheet at 3.667” and 7.334” parallel to 8.5”