Specifications include, but are not limited to: A. The Contractor shall be solely responsible to arrange for, obtain and bear the cost of necessary permits, bonds and fees for the automatic sprinkler work. B. Furnish and install fire protection system where shown on the Drawings. The system shall include all piping, hangers, sprinkler heads, valves, controls, drains and alarms. C. Furnish and install fire department connections located where shown on the Drawings. D. Furnish and install all alarms, flow switches and alarm bells on the inside and outside of building. The installation shall include all wiring, conduit and associated devices required for a fully functional installation. E. Provide testing of all piping and Work in full conformance with all applicable sections of NFPA 13. F. Provide complete shop drawings with hydraulic calculations to the Architect and to the Fire Protection Authority Having Jurisdiction. G. Provide certificates of inspection to the Architect for review upon completion of the Work. H. Furnish and install all equipment and devices as shown on Drawings. I. Periodically remove from the job site, all rubbish or debris resulting from the fire protection work. J. Provide all other equipment and devices shown on the Drawings. This shall include all ancillary devices, wiring and associated components for the proper operation of all equipment installed or affected by this Project.