Specifications include, but are not limited to: 2.1 Remove top 2” of the 1329 square yard asphalt parking lot. There will be a tack coat applied and then a 2” asphalt wearing course applied with the current slope. 2.2 Perform all off-site work necessary to meet the requirements of the project, local codes, reference standards, technical specifications and performance criteria. Identify and obtain all permits to comply with all federal, state, and local regulatory requirements associated with this work. Comply with the force protection criteria. 2.3 All material shall be installed per the manufacturer’s recommendations 2.4 Provide removal of all rock, debris and the current asphalt associated with the parking Install parking lines that delineate parking spots that are at least nine (9) feet wide and eighteen (18) feet long. Identify all parking spaces with four (4) inch stripes of yellow cold applied marking tape or traffic paint. Provide a minimum handicap accessible parking and unloading spaces that comply with ADA standards as required Provide signing for ADA spaces