Specifications include, but are not limited to: Provide work uniforms for Columbus Consolidated Government Departments, to include but not limited to the following: METRA Transit, Public Works, Engineering and Civic Center on an “as needed” basis. MATERIAL To be Milliken 100% Dacron Polyester, Texturized Woven. Weight 7.25 oz. per yard. Finish to be VISA. Single Warp 2-ply filling. CREASING Pockets and pocket flaps to be die creased to give uniform shape and size. The shirt is to have sewn in permanent military creases, 2 in front, 3 in back. COLLAR The collar is to be die cut. The back of the stand is to measure 1-1/2". The points, widespread, are to be 3-5/8" in length and top stitched 1/4" from edge. The interlinings are to be 100% Polyester Taffeta. Permanent collar stays of proper length are to be sewn inside collar so that no stitches are made through bottom leaf. The stand shall fasten with one button. SLEEVES To be straight and whole. There shall be one button placed on the sleeve placket approximately 2-1/2" above the top of the cuff. The cuffs shall be 2-1/2" wide and shall be top stitched 1/4" around the edge of the cuff. The cuff will close with 2 buttons. The sleeves must be secured to the body of the shirt by means of a merrow stitch with a safety stitch so as to strengthen the seam. The same stitch must be used on the side closing seam as well.