Specifications include, but are not limited to: 1. All Weight Room and Physical Education Equipment must be newly manufactured. Refurbished or used equipment will not be accepted. 2. Respondent must submit product literature with items quoted. 3. Frames: Constructed of 3” x 3” high stress ASTM A-500 grade B 11 gauge structural steel tubing. The double notched uprights have a laser engraved numbering system on each upright for exact bar location. 4. Main frame has extended lower band attachments so user is in the correct position to ensure safe and proper technique. 5. Welds: Welds are inert-gas MIG welding to conform to the following codes and/or standards: 3:1 AWS, A3.0 Welding Terms and Definitions 3.2 AWS D1.1-81 Structural Welding Code-Steel 3.2 AWS D9.1. 6. Bar Catches: Double pin weight bar support is made of #304 stainless steel with built-in handle. Double pin adjustment system for maximum support and safety. Lock out system for safety. 7. Safety Spotter Arms: 36” long made of 2” x 3” steel tubing with protective covering. Double pin adjustment system for maximum support and quick, easy adjustment and safety. 8. Weight Storage: Storage uprights are symmetrically angled out for safe and easy entry to the spotter position. 6 rust resistant weight storage holders and 2 chain and collar storage holders on each upright. 1 bar storage on each side. 9. Multi Grip Chin Station: Each side has 6 different positions allowing the user every possible chin up angle. Constructed of 1” solid steel grip with urethane covering. Urethane grades are a minimal grading of HR-125 density pcf of 2.60 plus/minus 0.10 and above in high compression areas. HR-150 with a density pc of 4.60 plus/minus 0.30. 10. Assembly: All frame components are bolted in place with ASE Grade 5 and ½” bolts and nonloosening nylon lock out fasteners. 11. Finish: Custom color powder coat paint, 3 stage pre-paint preparatory process that includes a state of the art pellet blasting (sand blasting) machine system that purifies the steel. The steel is then sent through a preheat stage 12. Compliant to all ASTM Standards for Fitness Equipment including: ASTM F2276-05, ASTM F2276-03, ASTM F2277-03, ASTM F1749-02, ASTM F2216-05, BSI-EN 957-1, and BSI-EN 957- 2. 13. Treadmills and Exercise Bikes should be Viper Commercial or ProMaxima