Specifications include, but are not limited to: Work under this ITB consists of furnishing all labor, materials, tools, equipment, means of transportation, and incidentals necessary to perform the services. Contractor must furnish equipment in good operating condition and operated by properly trained and qualified personnel. The Contractor must make a good faith effort to furnish the Department the fully operational equipment needed to perform Vegetation Removal Services at such time, and at such location(s) as directed by the Engineer. Prior to start of work, Contractor must inspect equipment to ensure the equipment is fully operational for the performance of its intended purpose. The Contractor will also be responsible for any traffic control, licenses, and permits required to satisfy the duties required herein. This work consists of clearing, removing and disposing of all vegetation and debris in areas within the R/W as specified, except such objects as are designated by the Engineer to remain or to be removed in accordance with the Plans or other sections of the Specifications. Vegetation and debris includes: trees, shrubs, vines, logs, limbs, mulch piles and all other debris associated with random clearing. Random clearing may be done by any method provided that the ground disturbance is minimal and no damage is done to property, structures, trees, or shrubbery to be retained, in or outside the R/W boundaries. Remove all trees, brush, stumps and roots projecting through or appearing on the surface of the ground by cutting or grinding flush with the surrounding ground surface. No grubbing operations are allowed. The Engineer will designate any trees, shrubs, plants, and other objects within the clearing limits specified that are to remain and be preserved.