Specifications include, but are not limited to: The Contractor shall perform an annual OSHA certified inspection. The work consists of inspections and replacement of parts as needed for the train lifts/ body stands, turntables and truck hoist at the South Yard Maintenance Facility. The Contractor will conduct a visual and test inspection all the equipment listed to determine the operation/performance capabilities and provide a detailed inspection report identifying discrepancies. The Contractor shall provide a detailed inspection report to the Manager of Buildings & Support Equipment or his designee. The Contractor shall provide parts replacement list to the Manager of Buildings & Support Equipment or his designee for approval prior to replacement. All inspections and component replacement services shall use the required lubricants specified by the manufacturer as follows. • Screw gear case: Mobilex EPl or the equivalent • Pressure fittings- Cam followers, turntable bearings etc.: Mobilex EP3 or equivalent • Motors: Each motor should comply with the manufacturer's guidelines • Central lubrication- screw and nut: Mobilith SHC 460 do not substitute • Hinge pins, Turntable latch, etc.: Mobil DTE heavy medium • Bevel gear case: Mobilube HD 80 W-90 or equivalent • Jack screws: Amco-amdex no. 2 ep • Worm gear reducer: Mobil 600w cycle. oil • Roller chain: Mobil DTE oil heavy medium