Specifications include, but are not limited to: The coat shall be designed to provide maximum functionality and mobility and relieve firefighter working stress. The design shall incorporate an arms forward pattern designed to accommodate the firefighter in their real working position. The pattern shall include underarm gussets and darts in the elbows for unrestricted movement. The shoulder seams on shell and liner shall be placed close to the collar in a modified Raglan pattern to mimic the natural location of the shoulder joint and minimize coat rise and extend range of motion when wearing an air pack. The sleeves shall be two- panel construction. The coat sleeve shall be naturally tapered designed and manufactured to provide unrestricted movement while bending the arm. The outer shell shall include four darts at the elbow area, two above and two below, the natural bend of the elbow along the sleeve seams. The thermal/moisture barrier liner shall be specially designed to work in conjunction with the shell with a fuller cut pattern. The body of the shell and liner shall be four-panel construction. The front two panels of shell and liner shall extend up to the top of the collar and be an integral part of the collar in a Shawl collar design.