Specifications include, but are not limited to: 11,000 Gallon Vertical Heavy Weight TanksMade from linear, UV stabilized high-density polyethylene rotational molding resin. Shall be designed andmanufactured to hold a product with a specific gravity up to 1.9 (15.8 pounds per gallon) at 73 degrees FTanks shall have a 22” slosh proof vented lid on topTank shall have four 3” openings at 12 o’clock, 3 o’clock, 6 o’clock and 9 o’clock with the center of the openings minimum 6” from bottom of tankwith Norwesco 3”, double threaded polypropylene fittings with EPDM gasket on each of the openings. (part# TK-CP62299 or equivalent)Tank shall have a built in graduated gallon indicatorsTank shall have 3” full port ball open/closed valve on each 3” opening (Norwesco part #61720 or approved equivalent)Tank shall have 3” close nipple (304 stainless) 3” in length on each 3” openingColor: Translucent blue with measurements (increment) in gallons on the tankSize: shall be approximate 144” diameter x 167” overall heightMust includean interior siphon tube installed on each end-wall (port valve opening)