Specifications include, but are not limited to: Provide additions and alterations to existing work required to produce a complete electrical installation. Relocate existing electrical work for other trades required to complete the work and to maintain buildings in service. Provide for the removal, reinstallation, reconnection or relocation of existing circuit wiring, wiring devices, lighting fixtures, etc., necessitated by the new work. If any portion of an existing circuit is in an area where no new work is being done, but is made electrically discontinuous by the new work, it shall be recircuited to maintain electrical continuity. Cutting, channeling, chasing, or drilling of walls, partitions, ceilings, or other surfaces and support, or anchorage of conduit, or other electrical work, shall be done without damage to other piping or building equipment. Existing surfaces shall then be patched and painted to match the surrounding areas.