Specifications include, but are not limited to: This contract includes on-site installation “tenant ready” condition and test of each unit. Washers and dryers shall be identical in brand. Dryer Dimensions shall not exceed: 43” height, 26 7/8” width, 28” depth Dryer Motor HP shall be a minimum of 1/3HP, 5.5 amps. Dryer Electrical specifications: 120/240/60/1-30 amp; 120/208/60/1-30 amp. Dryers shall have the capability of transitioning into cashless option or a combination of cashless and coin in the future. Dryers shall use tamper proof screws in the front, side and back panels of each unit. Dryers vents will be composed of a hard plastic, (PVC) type Dryers will be bolted to the floor of facility after set up Fastened with tamper proof screws at both ends Dryers must be new. Dryers shall be white in color. Dryers are to be front load type, unless otherwise specified Legs of dryer should be adjustable to allow for leveling. Dryers must have Electronic Display control and be microprocessor coin-dropped operated. Supplier must remove and dispose of all packaging materials related to dryer transport and installation. Dryer must have all required connectors, electrical wiring and plugs, and dryer vents. Supplier will take precautions to protect wall surfaces and doorjambs from damage. Any damage to walls and floors noticed at the time of installation shall be brought to the facilities attention. All equipment must be ADA compliant and Energy Star