Specifications include, but are not limited to: -Front 2.5" in height. Three digit unit number on left and right comers of Front Bumper. -Driver and 9.25" in height 2.5" in 2.5" in height 8" Fulton Passenger Lettering to read: height Grey lettering to County Sides SHERIFF lettering to read: Sheriffs read: EMERGENCY Office FULTON 911 Emblem COUNTY -Rear (1 .5") In height 2.5" in 3" in height lettering to read: height unit lettering to left www.FultonSheriff.org numbers on and right of tag Underneath Tag area left and right area that will comers of combine to rear bumper read: FULTON SHERIFF -Top 14.5" in height. Three digit unit numbers on rear top (Reflective Silver) l. All lettering is to be Dark Grey in pantone color matching unless noted otherwise. With the following CMYK color model: C--- 0.000% M--- 0.000% Y--- 0.000% K--- 90.196% 2. All graphics are to be done as non-reflective vinyl graphics. Unless noted otherwise 3. 3M premium graphic decal paper or a proven equivalent is to be used on all lettering. 4. Please provide the proximity in terms of miles in which you will be performing the work, to our facility here at: 1090 Jefferson Street Atlanta (30318). 5. Indicate your ability to provide additional product support should we need replacement graphics in the future. 6. Requested graphics placement on the vehicles will be advised to the selected vendor, by The Fulton County Sheriffs Office Fleet Staff. 7. Installation & Vehicle Graphic Design