Specifications include, but are not limited to: 1.Vendor will apply 2-3 applications of non-selective herbicide to kill existing Bermuda turf. 2.Once the existing Bermuda grass is dead vendor will scalp the turf to the ground level. 3.All debris and resulting from this project are to be removed from site. 4.Remove all existing rotor heads and cap below grade. 5.Remove existing soil to accommodate installation of USGA type sand to a depth of 2". 6.Sod cut to remove existing roots to a depth of 3". The soil below must be tilled to a depth of 6"-8" 7.There are currently (6) rotor zones that covers this area. Include reinstallation or repair of system as needed to provide 100% irrigation coverage. 8.All irrigation heads, main and lateral lines will be flagged and protected. 9.Vendor will be responsible to repair any damage done to the irrigation system including but not limited to all (Lateral lines, Main lines, Connections, Valves and Sprinkler Heads).