Specifications include, but are not limited to: 1.The contractor should furnish 5 feet high, black, PVC coated, chain link fencing approximately 1580 Linear feet, with Three (3), 12 feet wide gates and three (3), 4ft wide pedestrian gates and one entrance gate as depicted on the sketch provided. Posts should be PVC coated as well. a.Five feet fencing, 9 gage core b.2-1/2” terminal post, 20 WT thickness c.1-5/8” line post, 20 WT thickness d.1-5/8” Top rail, .055 Thickness e.#6 bottom tension wire f.All steel fittings, No Aluminum. g.Bollards should be 6 inches in diameter, buried to an appropriate depth, secured by poured concrete at the base. h.All bidders must include an itemized schedule of materials to be provided. 2.Contractor must provide RFID access controls. Access controls should be remote access from workstations of both City and County Network, single point access with RFID keys. The controller can be mounted in electrical room in the rear of onsite restrooms. www.secureakeystore.com has acceptable products. a.Access Control Panel—DMP Model XL 150 or equal b.Locking Mechanism for entry gate, Mag Lock c.100 Proximity Key Rings d.One (101), Proximity Key reader e.One (1) exit button.