Specifications include, but are not limited to: The work will include, but is not necessarily limited to, the following: 1.1.3.1 At roof areas shown on plans, remove the existing modified bitumen roofing system, which includes modified bitumen capsheet, bituminous interplies, and base sheet, down to the existing plywood sheathing, and discard. 1.1.3.2 Remove all existing bituminous flashings, and discard. 1.1.3.3 Remove all existing metal flashing including gravel-stop fascia, and discard. 1.1.3.4 Furnish and install a new fully adhered fleece-backed polyvinyl chloride (PVC) roofing system, as specified herein. 1.1.3.5 Furnish and install new membrane flashings and metal flashings, as specified herein. 1.1.3.6 Furnish and install new metal flashing including eave flashing, gutters, and downspouts, as specified herein. 1.1.3.7 (Alternate No. 1) At locations shown on drawings, furnish and install polyvinyl chloride extruded ribs to emulate metal panel roofing. 1.1.3.8 Furnish and install any miscellaneous items, as specified herein.