Specifications include, but are not limited to: 1. Furnish all materials and equipment, and perform all labor required for fence installation. 2. Removal of all unused materials. 3. Clean-up of job site. 4. Provide quality job in compliance with bid specifications. Approximately 1850 feet of 4 Rail # 1 Prime Treated Pine Fence with a finished height of approximately 54” - Posts = 4” x 6” x 7” on 8’ centers Treated # 1 Prime 8 feet long - Top of posts to be cut at a 35-degree angle - Rails = 2” x 6” x 16’ Treated # 1 Prime - Facers = 1” x 6” x 42” Treated # 1 Prime - Top of facers to be cut at a 35-degree angle - Fastened with coated deck screws (no nails) - All posts to be set in concrete (2500 PSI Minimum) 10” wide x 36” deep (minimum of 2” of concrete below post)