Specifications include, but are not limited to: 1. Refuse body to a minimum 25 cubic yards capacity, exclusive of hopper. 2. Packer body capable of packing 1,000 pounds per Cubic Yard based on average household refuse. 3. Packer body must meet all applicable ANSI Z-245.1 safety standards BODY CONSTRUCTION: 1. The roof and side sheets are to be one piece, 11 ga 80,000-PSI minimum yield strength steel throughout with no seams. 2. Roof and sides are to be joined together by one-piece formed corner 1/4" 50,000-PSI minimum yield strength steel. 3. Body sides and roof must be curved design. 4. The floor sheets shall have a thickness of 1/4" and be made out of 50,000-PSI minimum yield strength steel. The floor sheets are to have a formed flange, minimum 3" tall that ties into side sheet. 5. The floor support braces to be constructed of 1/2" x 6" steel bar 36000 PSI yield strength. 6. A poly side access door located at the left front corner of the body at floor level is to be provided. Opening is to be a minimum 30" x 32.5" and must slide rearward. Door to incorporate latch and locking mechanisms. BODY DIMENSIONS: 1. The overall height of body above the chassis frame is not to exceed 93 1/2" (no mounting sills). 2. The maximum inside width is to be no less than 90". 3. The outside width is to be no more than 96". EJECTION SYSTEM: 1. Unloading by full ejection method only. Dumping or rising of the body is not acceptable. Control lever for ejection is to be located at the front, left side of the body. 2. The ejection cylinder shall be telescopic consisting of multiple stages: A variable (adjustable) externally piloted resistance valve, which controls packing density and cylinder retraction must be incorporated in the ejector panel/tailgate lift two spool valve assembly. No portion of the ejection forces shall be directed toward the body floor (downward). 3. The ejector panel face sheet is to be minimum 3/16" thick, 50,000 PSI steel. The panel must withstand the packing mechanism forces and the ejection of highly compacted refuse.