Specifications include, but are not limited to: 1. Mt. Vista Boulevard (3337.64 LF) • Full width Mill 2” existing asphalt and dispose of off-site. • Construct 2” asphalt concrete wearing surface (9.5mm). • Replace existing asphalt curbing with new asphalt curbing. • Improve sections of shoulder by adding 2” Graded Aggregate base, 2” Type “B” Binder and 2” Top Coat. • Remove and replace sanitary sewer frames and lids (23ea). Traffic rated frames and lids shall be placed over existing manholes, leveled to match finished grades and secured in place with class-B concrete prior to overlay. • All water/gas valve risers shall be adjusted to grade or replaced if necessary. Risers, if necessary, shall be supplied and installed by the contractor. • All mail boxes needing re-located if necessary, shall be supplied and installed by the contractor. 2. Cabinwood Trail (1096.44 LF) • Construct 2” asphalt concrete wearing surface (9.5mm). • 2” Base Repair Type “B” Binder as needed • Remove and replace sanitary sewer frames and lids (7ea). Traffic rated frames and lids shall be placed over existing manholes, leveled to match finished grades and secured in place with class-B concrete prior to overlay. • All water/gas valve risers shall be adjusted to grade or replaced if necessary. Risers, if necessary, shall be supplied and installed by the contractor. • All mail boxes needing re-located if necessary, shall be supplied and installed by the contractor.