Specifications include, but are not limited to: 1. Demolition, removal, disposal of existing Carpet. All in accordance with Scope and Specifications. Unit of Measurement: Square Fee. 2. Supply, Install and finish of new carpettile.All in accordance with Scope and Specifications. Unit of Measurement: Square Yard. 3. Supply, Install and finish Glass doors(Aluminum Frame and Glass thick ½”), including hardware and door stops. All in accordance with Scope and Specifications. Unit of Measurement: Each. 4. Supply, Install and finish Frosted LaminatedGlass Panels½”. All in accordance with Scope and Specifications. Unit of Measurement: Square Feet. 5. Supply, Install and finish Frosted Glass Storefront System. All in accordance with Scope and Specifications. Unit of Measurement: Square Feet. 6. Supply, Install and finish four (4) Card Readers and four (4) Electromagnetic Locks. Including, cables (#22 AWG cable) conduit ¾” EMT for electrical and communication. All in accordance with Scope and Specifications. Unit of Measurement: Lump Sum. 7. Supply, Install and finish 2” Dia. Stainless Steel Top rail and Metal Bottom Rail. All in accordance with Scope and Specifications. Unit of Measurement: Lineal Feet. Considering the location of the ventilation system, the Authority is requesting Contractor to supply and install a five‐foot‐high translucent glass privacy wall enabling controlled access in and out of the PCC. Per the proposed furniture layout, the secure entry doors are stipulated to be a three‐foot‐wide single swing door on each end of the space. 1. Contractor shall field measure existing conditions prior to start of work. 2. Contractor shall consider to provide a Dumpster for its purposes. 3. Contractor shall submit shop drawings and installation details/instructions for approval prior to start of work. 4. Coordinate schedule and working hours with MARTA prior to start of work. 5. Protect existing adjacent finishes during construction. Repair any damage to adjacentsurfaces caused during construction to match existing. 6. Remove carpet directly adjacent to new work and replace with new carpet to match existing after installation. Carpet material: Static Control Carpet. Description: Julie Industries. Color: LAN 4.1, Faulkner. 7. Floor stop basis of design: IVES FS436 Floor DOME Stop (IVESHINGES.COM) 8. Provide the same brushed finish type on all stainless‐steel/aluminum elements. 9. Glass Rail & Gate System Basis of Design: CR: US Aluminum (CRLAURENCE.COM) or approved equal.