Specifications include, but are not limited to: Provide Hobart Dishwasher with Steam Booster and Steam Blower dryer (or approved equal) • Deliver, uncrate, and set in place dishmachine including: 1. Make all utility connections from existing disconnect or electrical service and water connections from nearest cutoff valve to the booster heater. 2. All plumbing connections from the booster heater to the dishmachjne. 3. All electrical and drain connections to the booster heater and dish machine, and interconnecting wiring from the table limit switch to the terminal board in the control panel of the dish machine. 4. All plumbing connections from the dishmachine to the nearest drain lines. 5. Vendors must make all table welds and modifications to clean dish tables and provide 4'8" soiled dish table to be welded to the existing soiled table with a dishmachine connection and a 7'0" soiled dish table as indicated on the layout drawing with limit switch (see Exhibit 1 below). Tables are to have rolled rims around all sided and provided with the dish machine connections. All welds seams and corners on dish tables must be fully welded, ground smooth and polished