Specifications include, but are not limited to: Installation of a new -48VDC Light-Emitting Diode (LED) tower lighting system. The tower lighting system, mounting, and grounding hardware shall be furnished and installed in accordance with these specifications and plans. The main elements of this project include, but are not limited to: • Replace existing tower lighting system with a Technostrobe -48VDC LED SNMP tower lighting system. The tower lighting system includes a new tower lighting controller, surge protective device (SPD), photocell, conduit, and side markers depending on the tower configuration. The work described in this scope includes the necessary wiring of this system to the -48 VDC system. • Remove existing antennas, transmission lines, and mounting and grounding hardware that are no longer in use, and properly dispose of them. • Inspect all installation work. • Dispose of all other material and debris. • Final acceptance inspection. • Entire job shall be in accordance with the plans and specifications contained in the site specific appendices.