Specifications include, but are not limited to: A. Locate all underground utilities in the public right of way and on private properties. In addition, to locating buried utilities through a public utility line location service, it will be the responsibility of the Contractor to contact the owner/resident to locate buried on-site water lines, electric lines and septic systems. As a standard Plumbing practice, the Contractor should utilize the local “Line Location Services for all Public Utilities”. B. Unless local code requires alternate line sizes: Furnish and install ¾“ Schedule 40 PVC potable water lines (for service line lengths up to 150’), one-inch (1”) schedule 40 PVC potable water lines (for service line lengths greater than 150’ up to 250’), one and a half inch (1½”) Schedule 40 PVC potable water lines (for service line lengths greater than 250’), and two inch (2”) Schedule 40 PVC to match existing line sizes at commercial properties. All line sizes, including all required fittings, are to be installed in the most direct/economical path from utility’s water meter to the specified residence/commercial property. At sites where the well is near the front of the property the most direct/economical service line path will be to the point on the downstream side of where the existing well’s service line will be disconnected.