Specifications include, but are not limited to: The District’s objective is to install two (2) three-foot wide strips of sod one at the top of slope and one at the approximate middle of slope as directed by the District’s project manager. The total estimated area to be sodded is approximately 110,000 sf. All other disturbed areas will be hydroseeded. Contractor shall provide all materials, labor, and equipment necessary to install and place sod as directed by the District’s project manager. The sod type shall be Argentine Bahia sod. All sod shall be pinned with U shaped pins on slopes greater than 3-1 slope. Palletted sod shall be installed in a staggered pattern such that seams do not match in order to minimize erosion potential. Slopes will be prepared (flat) for sod installation prior to installation, the vendor is responsible for repairing ruts caused by his operations before and after placing sod. District staff shall inspect the installation for approval of sod condition and placement the day the sod is placed.