Specifications include, but are not limited to: 14 gauge, welded frame, with Autophoretic coating. Frame can be field separated into three sections for transport through small areas; • Front Services Access; • Supply air exits from the bottom of the unit; • Return air enters insulated & powder coated; • Exterior panels insulated & powdered; • 4” filters, MERV 8 rating; • EC Motor with Fans Operating Under the Floor; • Infrared Humidifier with automatic flush cycle. Capacity of 22 lbs/hr (kg/hr); • Three-stage, Finned tubular, 304/304 stainless steel electric reheat with a capacity of 25 KW (BTUH); • Dual refrigeration circuits with liquid line filter driers, refrigerant sight glasses, expansion valves, and liquid line solenoid valves; • Two (2) independent Digital Scroll Compressors provide variable capacity, increased part-load energy efficiency, and reduced compressor cycling; • A-frame Evaporator coil with stainless steel drain pan; • R-407C refrigerant. Field supplies and field charges on air-cooled units; • iCOM Service Bracket; • the Liebert IntelliSlot Unity Card (IS-UNITY-DP) provides ground fault isolated RS-485 Modbus, BACnet IP and Modbus IP network connectivity to Building Management Systems for unit monitoring and management. Also, provides ground fault isolated 10/100 baseT Ethernet connectivity for unit monitoring and management. The supported management interfaces include: SNMP for Network Management Systems, HTTP for web page viewing, SMTP for email, and SMS for mobile messaging. This card can support dual IP and 485 protocols simultaneous. IS-UNITY-DP card is factory-installed in an IntelliSlot. This card can support dual IP and 485 protocols simultaneous. IS-UNITY-DP card is factory-installed in an IntelliSlot; • Zone Leak Sensor Qty 1 per unit; • SFA (Requires Rep to add SFA) Standard EC Fan Floor stand; • Includes (1) EC Fan Lowering Jack Per Order;