Specifications include, but are not limited to: 1. T-Shirts Color: Sand Fabric: DRIFIRE® by Optimer 75% modacrylic/15% cotton/10% nylon, 5.4 ounce with a minimum ATPV 8.0 cal/cm² Rating. Style: Short sleeve t-shirt with ribbed knit collar, open sleeves. Sizes: From medium to 3XL (Talls from large to 3XL). Sleeves: Short sleeves hemmed and attached with a two-needle coverstitch. Front: Plain, round crew neck. Back: Plain back. Collar: Matching ribbed neck, set with a three-thread serge stitch. Thread: All construction is sewn with Nomex® thread. Cutting: Shirts will be marked and precision cut. Finishing: Finished shirts will be steam pressed. The completed shirt will be folded and enclosed in a poly bag. Label: A label permanently attached to the back yoke center indicating lot number, size, fiber content, fabric brand name and the ARC Rating. A permanent label attached to the lower right front indicating the care instructions, and compliance with ASTM F-1506. Embroidery: One each Beaches Energy Services logo will be embroidered in PMS 5473 Nomex thread. Approved manufacturer: Tecgen, Dri Fire and Riverside Quantity: 240 each (45ea M, 70ea L, 60ea XL; 45ea XXL, 10ea XXLT, 10ea XXXLT) 2. Woven Shirts with Pockets Color: Gun Metal (Gray) Fabric: 55% FFR (Fibrous Flame Retardant Fiber) modacrylic, 45% cotton, 5.5 ounces per square yard with a minimum ATPV 8.0 cal/cm² Rating. Style: Long-sleeve, dress style shirt with banded collar, two-piece yoke, two pockets with flaps, pencil pocket and round dress style hem. Sizes: From small to 3XL Sleeves: Long sleeves with rounded cuffs lined with 3.75 100/% cotton, one-button closure. Cuff width 2 ½” topstitched ¼”. Front: 7/8” hemmed right front. Seven four-hole melamine buttons. Buttons are lockstiched. One pocket and flap each front. Back: Once pleat each side with two-piece yoke, button hemmed 3/16”.back made from the same material as the front of the shirt. Collar: Dress style banded collar, fully lined with #78 Durapress, ¼” topstitching. Band is lined with #600 cotton. Pockets: One each front, 5” wide and 5 ⅞” deep at point and one bartack at each upper corner. Self-material pencil compartment in left pocket. One button each pocket. Flaps: One over each pocket, lined with 3.75 cotton, has 1/16” topstitching and one buttonhole. Bartack reinforcement at corners of both flaps and at pencil opening on left. Thread: All exposed construction is sewn with Nomex® thread. Cutting: Shirts will be marked and precision cut. Finishing: Finished shirts will be steam pressed. The completed shirt will be folded on a backboard with a collar strip and enclosed in a poly bag. Label: All shirts will have a label permanently attached under the collar showing the lot number, size and fiber content. 3. Duck Quilt-Lined Active Jacket Color: Black Fabric: Made of 13 ounce Flame-Resistant 100% cotton duck, with a minimum ATPV 33.6 cal/cm² Rating. Style: Quilted-lined body & hood with two (2) inside patch pockets with flame-resistant hook-and-loop closures, Nomex rib-knit cuffs & waistband and a brass front zipper with Nomex zipper tape and hidden snap closure for electric arc protection. NFPA 70 E compliant. Two hand warmer pockets. Sizes: From small to 4XL & Tall L-3XL Thread: All exposed construction is sewn with Nomex® thread. Main seams are triple stitched for strength. Label: All Jackets will have a label permanently attached under the collar showing the lot number, size and fiber content. A label permanently attached to the center back of yoke indicates brand identification and care instruction. A swiftack label will be attached to jacket containing all of the above information plus the statement “Secondary Protection Only” – Meets Requirements of ASTM F-1506. Embroidery: One each Beaches Energy Services logo will be embroidered in white Nomex thread above the left pocket. Quantity: 48 each (2ea S, 5ea M, 10ea L, 1ea LT, 17ea XL, 10ea XXL, 2ea XXLT, 1ea XXXLT)