Specifications include, but are not limited to: o Land Surveying Services under the responsible charge of a Professional Land Surveyor registered in the State of Florida and in accordance with the Florida Department of Transportation Policy 760.00-760.012 and the Florida Department of Transportation Location Manual necessary for the subject project including referencing all centerline survey control points. o Geotechnical evaluations by a Geotechnical Engineer registered in the State of Florida for the purpose of establishing design criteria for the proposed improvements. o Preparation of Construction Documents including safety improvement plans and specifications in accordance with current FDOT design criteria including but not limited to: FDOT Manual of Uniform Minimum Standards for Design, Construction and Maintenance for Streets and Highways; FDOT Plan Preparation Manual; FDOT Design Standards; FDOT Drainage Manual and specific FDOT Standard Specifications. Plans will be submitted in 30, 60, 90, and 100% formats to Hendry County and FDOT, when applicable, for review and comment. o The Consultant will provide three (3) paper copies of signed and sealed construction plans (11” x 17”), eight (8) bound sets of plans (11” x 17”) and a CD containing all electronic drawing files. Electronic drawing files will be produced in a manner suitable to Hendry County using state plane coordinates with a logical layering and layer naming convention. Layer names shall be approved by Hendry County. o The drawing will include a cover with location map, a drawing key map, typical section and detail sheets, summary of pay item sheet, summary of quantities sheet(s), quantity computation booklet, general note sheet, special conditions, technical specifications, alignment plans, and detailed signing and pavement marking plans for the entire project. o Prepare Engineer’s Opinion of Probable Construction Cost. o Assist the County with the bidding process including the preparation of the bid document, attending the pre-bid conference, answering bidders questions, preparing addenda, responding to RFI’s, and evaluating the bids and preparing the bid tabulations for qualified bidders