Specifications include, but are not limited to: A. The Contractor shall carefully coordinate with the Owner during all the demolition work and shall adjust his schedule for this work in accordance with the Owner’s requirements to minimize disruption of work in the adjacent spaces and buildings. B. Complete wrecking of areas and the removal and disposal of demolished materials as shown on the Drawings. C. Demolition and removal of existing walls and other items noted on the Architectural, Structural, Mechanical and Electrical Plans. A. Miscellaneous metal fabrications and castings. B. Anchoring Systems. C. Equipment Hangers and Supports as required. D. The tabulation of items herein is not intended to be all-inclusive. It shall be the Contractor's responsibility to provide all metal fabrications and castings shown on the Drawings, specified, or which can reasonably be inferred as necessary for the completion of this project. A. General framing, plates, blocking, braces, furring and nailers. B. Rough carpentry hardware, including, but not limited to, nails, screws, toggle bolts and other anchorage devices. C. Treated wood products shall be used where in contact with concrete or CMU. D. All pressure treated wood shall be arsenic-free.