Specifications include, but are not limited to:a.Overall dimensions approximately 78” H x 49” D x 25” W with an inside total cabin height of approximately 58”. b.Completely welded cabinet construction with outer cabinet formed and welded to base. All seams turned in, to eliminate raw edges. All exposed fasteners shall be tamper resistant. c.Caster: Minimum diameter of 5” with two (2) casters fitted with brakes. d.Capacity of 18 total, 18” L x 26” W x 2 7/8” D wire baskets. e.Electrical: 480 volt, three (3) phase. f.Heating System and Controls: Top mounted heater secured with tamper resistant fasteners. Capable of heating from 70 – 200 degrees in five (5) minutes with a differential of +/- 2.5 degrees and recovery from 120 to 200 degrees in one (1) minute (based on empty cabinet). g.Electronic controls: Programmable with at least four (4) programs to include covered security panel.