Specifications include, but are not limited to: 1. Prefabricated modular girder style steel equipment/vehicle bridge superstructure. 2. Shop drawings must be provided, stamped and signed by professional engineer that is registered in the State of Florida. 3. Width: must be 14 foot and clear between rails. 4. Design code: AASHTO LRFD bridge design specifications. 5. Design loading will be minimum HS-20/44. 6. All exposed surfaces will have a galvanized finish. 7. Bridge Decking will be steel and prepared for concrete to be poured after installation. 8. Guardrail posts and guardrail will be included. Guardrail will be W-beam and the center will be 1’-9” from finished bridge deck. 9. Anchors and fasteners will be included. 10. Drawings with bridge elevations and details for reinforcement and bearing. 11. Assembly instructions for bridge system. 12. Provide vertical and horizontal loading of bridge for civil design.